PROGRAM IC-80FX FREE DOWNLOAD

Sets the duty cycle to 1: Sets the squelch delay to short. However, you can adjust it to suit your operating environment including your headset performance. W] ENT for 1 second to enter the channel name programming mode. Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. Charging the battery pack, or replacing the batteries in the case is necessary. When using the VOX function, we recommend setting the microphone gain to 3.

Uploader:	Milkree
Date Added:	22 February 2006
File Size:	63.66 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	6757
Price:	Free* [*Free Regsitration Required]

Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation.

The VOX function is not activated while in the Set mode. Select an option in the Set mode.

If you experience a protram in your ears, reduce the volume level or discontinue use. The latch is tightly locked, so use caution when releasing it.

This may distort your speech. Additionally, battery performance or battery life may be reduced. The internal microphone and speaker will not function when an option is connected.

Transmits the appropriate DTMF code assigned to the key. D Battery life q Remove the battery case if it is attached. D Time-out timer To prevent accidental prolonged transmission, the transceiver has a Time-out Timer. Do not charge or use a wet battery.

Buy Now Icom Ic 80fx Online -

Battery damage may not be visible on the outside of the case. Sets the squelch delay to short. Higher values make the VOX function more sensitive to your voice.

Sets the contrast to high. Continuing to charge the battery beyond the specified time limit may cause a fire, overheating, or the battery may rupture.

Only Icom battery packs are tested and approved for use with Icom radios or charged with Icom chargers. See page 17 for details.

If the battery must be left unused for a long time, it must be detached from the radio after discharging. NEVER short terminals or charging terminals of the battery pack.

Less than —70 dB: Sets prograj duty cycle to 1: The charging time period should be less than 48 hours. The battery may heat up or rupture if charged out of the specified temperature range.

The transceiver will become hot when operating it continuously for long periods of time.

IC-80FX INSTRUCTION MANUAL

The selecting speed is automatically accelerated when rapidly rotating [VOL]. Even when the transceiver power is OFF, a small current still flows in the transceiver.

The Function mode remains activated for 1, 2 or 3 seconds after a key is pushed to activate its second function. When no operation occurs and no signal is received for 5 seconds, the transceiver enters the Power Save mode, and sets "1: You can use it without disturbing the squelch setting, even when mute functions such as the tone squelch are in use.

ICFX INSTRUCTION MANUAL |

NEVER operate or touch the trans- pack. Battery charging caution Ensure the tabs on the battery pack are correctly aligned with the guide rails inside the charger. Approximately 16 hours The following item is additionally required: See page 41 for details of the VOX function.

Using third-party or counterfeit battery packs or chargers may cause smoke, fire, or cause proyram battery to burst.